How to clean stainless steel or aluminium oven front panel / door?
Resolution
Question:
- How to clean stainless steel oven front panel / door?
Applies to:
- Integrated oven
- Freestanding cooker
Resolution:
1. Treatment of stainless steel before installation:
- Remove the thin, protective film (if applicable).
- Clean the surface with a cleaning spirit to remove any remaining solvent from the glue. Clean along the grain of the steel.
- Wash with warm water and dishwashing detergent.
- Wipe down with a clean dry cloth.
- Polish with a steel care product. Always polish along the grain of the steel.
- Afterwards, polish with a clean dry cloth to remove any excess steel care product / oil. Polish again along the grain of the steel.
2. Treatment of stainless steel during use:
- Wash with warm water and dishwashing detergent.
- Wipe down with a clean dry cloth.
- Polish with a steel care product. Always polish along the grain of the steel.
- Afterwards, polish with a clean dry cloth to remove any excess steel care product / oil. Polish again along the grain of the steel.
3. Treatment of aluminium:
- Clean the surface with a solution of soap and water.
- If thorough cleaning is necessary, make a mixture of alcohol and cleaning chalk.
- Apply directly with a cloth.
All necessary care products are available in our Webshop.
Was this article helpful?
Related Articles
- How To Remove Oven Shelf Supports For Cleaning
- Electric grill - open door grilling
- Appliance Reset
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results
- Oven steam self - cleaning function
- Oven pyrolytic self - cleaning function gives poor results
- Oven general use / cleaning tips
- Oven front panel / door gets hot