Fridge freezer - How to replace the thermostat (4)
Applies to:
- Fridges
- Freezers
Resolution

Always refer to the safety information in your product's user manual before carrying out any repair or maintenance work. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK
Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.


WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! RISK OF PINCHING

Wear safety gloves if you perform maintenance or repair work involving belts.

WARNING! CHOKING HAZARD
Small parts not suitable for children under 3 years. Keep all small parts and packaging away from children.
Only adults should use or install the product.
Always empty the appliance of all the water, e.g. tumble dryer water container. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.
Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.
Do not use or install the product if damaged.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.
How to replace the thermostat
1. Open the right panel. Stick a screwdriver in the hole

2. Push out the knob as shown in the picture

3. At the bottom of the hole there's a nut

4. Unscrew the nut and take out the thermostat

5. Using a screwdriver, push the 3 clips at the top and the 3 clips at the bottom as shown in the picture.


6. After unlocking the 6 clips, press the pin that secures the control panel using a pair of pliers and remove the entire control panel


7. • Replace the thermostat and put the control panel back on