Fridge freezer - How to replace the thermostat (1)
Applies to:
- Fridges / Freezers
Resolution
Always refer to the safety information in your product's user manual before carrying out any repair or maintenance work. https://www.electrolux.com/support/user-manuals/
WARNING! RISK OF ELECTRIC SHOCK
Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
WARNING! RISK OF INJURY
Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.
WARNING! RISK OF EYE INJURY
Be sure to wear safety glasses when you're doing any maintenance or repair work with springs involved.
WARNING! RISK OF PINCHING
Wear safety gloves if you're doing any maintenance or repair work on belts.
WARNING! CHOKING HAZARD
Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.
Only adults should use or install the product.
Always empty the appliance of all the water, e.g. tumble dryer water container. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.
Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.
Do not use or install the product if damaged.
Please note that DIY or amateur repair can have safety implications if not done right and might void the warranty. Having the necessary know-how is crucial.
How to replace the thermostat
1. Remove the ice matic group. Then unscrew the three screws which are fixing the ice matic holder and remove it
2. Unscrew the two screws that are holding the thermostat cover in place and take it off by pulling it towards you.
3. Disconnect the housing and remove the electromechanical thermostat along with its cover.
4. Replace the complete assembly.