Washing machine displays three dashes
Issue
- Washing machine displays three dashes
Applies to:
- washing machine
Resolution
- Reset the machine by switching off the power and reconnecting after approx. 1 minute.
- Then disable the child safety lock, as instructed in the user manual. Download .
Cause:
If the washing machine displays three dashes, indicates the washing machine has finished the cycle with the “CHILD LOCK” enabled and the washing machine is then switched off using the selector button or a power outage occurs.
- Three dashes may appear on the display when the washing machine is switched on.
The TC4 Display, touch screen is locked:
 | Three dashes on the display. |
 | Notification of “Child lock” enabled. |
Was this article helpful?
Related Articles
- Washing machine displays padlock - Electrolux
- Washing machine displays 1- minute pause
- How to clean and maintain your Electrolux washing machine and extend its life
- Connected appliances - The application cannot connect to the appliance
- Grey marks on laundry after washing in washing machine
- The door of the washing machine cannot be opened
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not heat water, and does not display an error message
- How to set up AutoDose in the AEG washing machine? (super compact detergent) (video)