Seal on the washing machine's door is damaged
Resolution
Issue:
- The seal on the washing machine's door is loose, damaged or deformed
Applies to:
- Front loader washing machine (integrated and freestanding)
Resolution:
1. Contact an Authorized Service Center.
If the door seal is loose, damaged or deformed we recommend requesting a visit by a service engineer to replace the seal.
Cause:
1. Damage to the washing machine's door seal is normally caused by overloading the machine or catching the laundry between the seal and the door pane at the start of a wash cycle.
2. Washing fabrics which are heavily soiled with oil, grease or other greasy substances can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
Was this article helpful?
Related Articles
- Connected appliances - The application cannot connect to the appliance
- Grey marks on laundry after washing in washing machine
- The door of the washing machine cannot be opened
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not heat water, and does not display an error message
- How to clean and maintain your Electrolux washing machine and extend its life
- How to set up AutoDose in the AEG washing machine? (super compact detergent) (video)
- Washing machine displays padlock - Electrolux
- Washing machine’s fluff filter is jammed, cannot be removed