How to prevent limescale build-up in the dishwasher?
Issue
- How to prevent limescale build-up in the dishwasher?
- Why should you use salt in the dishwasher?
- What do you need the dishwasher water hardness setting for?
Applies to:
- dishwashers
Resolution
1. Set the water hardness level of the dishwasher according to the tap water hardness level
Water hardness table
German degrees (°dH) | French degrees (°fH) | mmol / l | Clarke degrees | Water softener level |
47 - 50 | 84 - 90 | 8.4 - 9.0 | 58 - 63 | 10 |
43 - 46 | 76 - 83 | 7.6 - 8.3 | 53 - 57 | 9 |
37 - 42 | 65 - 75 | 6.5 - 7.5 | 46 - 52 | 8 |
29 - 36 | 51 - 64 | 5.1 - 6.4 | 36 - 45 | 7 |
23 - 28 | 40 - 50 | 4.0 - 5.0 | 28 - 35 | 6 |
19 - 22 | 33 - 39 | 3.3 - 3.9 | 23 - 27 | 5 factory setting |
15 - 18 | 26 - 32 | 2.6 - 3.2 | 18 - 22 | 4 |
11 - 14 | 19 - 25 | 1.9 - 2.5 | 13 - 17 | 3 |
4 - 10 | 7 - 18 | 0.7 - 1.8 | 5 - 12 | 2 |
<4 | <7 | <0.7 | < 5 | 1 do not use salt at this level |
2. Use salt every time, even if you use multi-detergent tablets, to:
•prevent the formation of the limescale on the heater
• get the best dish-washing performance
•prevent the formation of white spots on glass
3. Consult your :
•on how to fill the salt container
•on how to properly open and close the salt cap
•to put salt just before starting a wash cycle (to avoid salt crystals remaining on the tub bottom)
4. Use a descaler once every two months or 60 cycles. It prevents the limescale depositing on the heater.
Follow carefully the instructions on the packaging of the product. We recommend specialized maintenance detergents available from our .
Important remarks about the detergent:
Local or unknown brand detergents do not always guarantee the same washing performance. For the same brand, the detergent manufacturer and its chemical composition may differ. Washing performance may vary completely and sometimes causing the foam formation.
Cause:
- In the presence of hard water and incorrect water softening settings, limescale deposits over time on the heater. As a consequence, damage requiring service intervention may occur
Was this article helpful?
Related Articles
- Dishwasher does not switch on, no light on the panel
- It takes too long for a dishwashing cycle to start
- Too much foam in the dishwasher during or after finish of the cycle
- Using dishwashing multi-tablets
- Dishwasher displays error message i30, drains constantly
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Glassware has cracks and scratches after washing in the dishwasher
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher displays error code i23, not draining
- Unpleasant odour from the dishwasher
Related Articles
- Dishwasher does not switch on, no light on the panel
- It takes too long for a dishwashing cycle to start
- Too much foam in the dishwasher during or after finish of the cycle
- Using dishwashing multi-tablets
- Dishwasher displays error message i30, drains constantly
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Glassware has cracks and scratches after washing in the dishwasher
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher displays error code i23, not draining
- Unpleasant odour from the dishwasher