Display of my washing machine is blurry
Resolution
If the display of my washing machine is blurry, refer to the suggestions below for step by step instructions.
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The washing cycle is longer / shorter than it says on the display
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine displays message: "Top up salt" and error code EF8
- Washing machine displays padlock - Electrolux
- The door of the washing machine cannot be opened
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- The "drum cleaning" icon shows on the washing machine display
- How to clean the washing machine detergent drawer