Cycle indicator light is flashing on the dishwasher
Resolution
If the dishwasher LED is flashing and the programme is not starting:
1. Make sure that the appliance door is fully closed. An audible click should be heard.
2. If the delay start is set, cancel the setting or wait for the end of the countdown.
3. Press and hold the RESET / CANCEL button(s) (normally highlighted on the panel) which should abort the cycle and allows selecting a new one.
Was this article helpful?
Related Articles
- Dishwasher displays error code i23, not draining
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Unpleasant odour from the dishwasher
- Rust spots on cutlery after washing in the dishwasher
- Dishwasher displays error message i30, drains constantly
- Using dishwashing multi-tablets
- Discoloration of silver or aluminium items after washing in the dishwasher
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher tablets do not fully dissolve