Using dishwashing multi-tablets
Resolution
When using multi tablets, it may not be necessary to fill the salt dispenser and the surfactant dispenser, depending on water hardness. In hard water areas, salt and surfactant are still recommended for best dishwashing results.
- Adjust the water hardness electronically to level 1. At this level, the (add salt) indicator will not illuminate on the control panel.
- Enable the multi-tablet function by pressing the relevant button.
- Consult the user manual for detailed information. Download .
- Enable the multi-tablet function before every cycle.
- If the drying cycle produces poor results, fill the surfactant dispenser and set the water hardness level to 1 or 2.
Note: The multi-tablet function must be enabled after you select a cycle and will not be saved in the memory.
Was this article helpful?
Related Articles
- Discoloration of silver or aluminium items after washing in the dishwasher
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher tablets do not fully dissolve
- Dishwasher displays error message i40, i43 or i44
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not / will not start but the power is on
- How to add salt to your Electrolux dishwasher
- Dishwasher leaves white residue on dishes and cutlery
- Before using your Electrolux dishwasher for the first time