Tumble dryer does not stop when the cycle is finished

Resolution

If the tumble dryer does not stop when the cycle is finished, this may be because of the “anti-crease” phase.

• If the tumble dryer continues running in this phase for about 1 hour and can be stopped manually.
• Turn the cycle selector to the Off position.

If the cycle runs much longer than 2-3 hours:

A cycle with a maximum drying level normally takes up to 2-3 hours.

• The bed-linen cycles last longer.
• There can be a problem with measuring moisture.

Possible causes:

• Inappropriate grounding of the tumble dryer.
• Connection by an extension cord.
• Dirty felt tape / sensors in the drum. The drum and tape can be cleaned with vinegar.
• Dirty filters, condenser or condenser compartment.

If the above does not resolve the problem, contact Authorized Service Center.

To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.