Tumble dryer displays error message CE / CF
Resolution
Issue:
- Tumble dryer displays error message CE / CF
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code CE or CF, there is a problem with the electronics.
2. To resolve this issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- When I open my Electrolux tumble dryer, there is a large amount of lint / fluff
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer does not stop when the cycle is finished
- Tumble dryer ends the programme immediately after the start
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message "Err"
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- Tumble dryer drum does not rotate, no error message
- Tumble dryer displays error message EHO, EH0