Tumble dryer displays error message C6
Resolution
Issue:
- Tumble dryer displays error message C6
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C6, there is a problem with the moisture sensor.
The cycle takes longer than normal, more than 4.5 hours.
- Check if the machine is connected to an grounded socket.
- If not, there is a problem with the moisture measurement, which can be repaired by an Authorized Service Center.
2. To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- AEG Tumble dryer stops after a few minutes of the cycle
- How to reset WiFi network settings on my Electrolux dryer
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer does not stop when the cycle is finished
- Tumble dryer drum does not rotate, no error message
- Tumble dryer's drying results are poor and laundry is damp after drying
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E60 and does not heat up
Related Articles
- AEG Tumble dryer stops after a few minutes of the cycle
- How to reset WiFi network settings on my Electrolux dryer
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer does not stop when the cycle is finished
- Tumble dryer drum does not rotate, no error message
- Tumble dryer's drying results are poor and laundry is damp after drying
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E60 and does not heat up