Oven displays error message C1, C2, C3 or C4
Issue
- My oven shows error code C1, C2, C3 or C4 on the display
Applies to:
- Ovens with Pyrolitic Cleaning function
Resolution
If your oven displays error message C1, C2, C3 or C4, refer to the suggestions below:
DISPLAY CODE | DESCRIPTION | TROUBLESHOOTING |
C1 (*) | Telescopic rails during pyrolytic treatment. | Remove the telescopic rails and all accessories from the oven compartment before activating the pyrolytic function. |
C2 (*) | The cooking thermometer (Food Sensor) is in the connector during the pyrolytic treatment. | Remove the cooking thermometer before activating the pyrolytic function. |
C3 (*) | Open door during the pyrolytic treatment. If the door is open, you cannot perform the pyrolytic treatment. | Make sure to fully close the oven door before the pyrolytic function is activated. |
C4 (*) | The Plus Steam button is activated while switching on the pyrolytic treatment. | Press the Plus steam button again to unselect Plus steam before switching on the pyrolytic function. |
If the problem persists, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Oven displays error code (F and number)
- How to set a cooker timer (duration) / minute minder
- How To Remove Oven Shelf Supports For Cleaning
- Oven cooling fan runs all the time
- The door of the oven does not close properly
- How to prove the dough in the oven, if it is not equipped with special programme?
- How to clean the Electrolux oven with pyrolytic function? (video)
- Symbols and functions on your Electrolux oven
- Oven displays SAFE or padlock symbol
- Electric grill - open door grilling