Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to:
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause:
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- A “0” or square is flashing on the display of my fridge-freezer
- My fridge freezer is not operating
- The front corners and sides of my refrigerator / fridge freezer are warm
- Drip tray location on integrated fridge freezer
- What is the optimal temperature in the refrigerator / freezer?
- The door of my fridge/freezer is not closing properly
- Why is my fridge frosting up?
- Water Leaking From Fridge / Fridge Freezer
- Fridge freezer shows F6 on the display