Fridge freezer shows code E08
Issue
- Fridge freezer displays error code E08
Applies to:
- Fridge freezer
Resolution
- Error code E08 indicates that the power supply to the appliance has dropped to below 170 V
- This is not an appliance failure, this error helps to prevent damages to the compressor.
- The voltage needs to be increased back to required levels
- If this warning continues an authorised technician needs to be contacted
Cause:
- Low Voltage Warning
Was this article helpful?
Related Articles
- Water Leaking From Fridge / Fridge Freezer
- There are three lights flashing in my fridge
- My Electrolux fridge-freezer’s door is difficult to open (video)
- My fridge freezer is not operating
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Serial number/Model number/Product number (PNC) on my fridge freezer
- How to avoid/reduce moisture formation in my fridge?
- There is damage, a crack, scratch or hole in my Electrolux fridge freezer
- Broken Freezer Drawers - Electrolux
- A “0” or square is flashing on the display of my fridge-freezer