Display of washer dryer is blurry
Resolution
If the display of my washer dryer is blurry, refer to the suggestions below for step by step instructions.
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- LED flashes on the washer - dryer's display
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer-dryer emits noises and shakes while spinning
- How to clean and maintain your Electrolux washer dryer
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Wool clothing shrinks after washing in washer - dryer
- Washer dryer displays error message E30, C3 or emits 3 beeps
Related Articles
- LED flashes on the washer - dryer's display
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer-dryer emits noises and shakes while spinning
- How to clean and maintain your Electrolux washer dryer
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Wool clothing shrinks after washing in washer - dryer
- Washer dryer displays error message E30, C3 or emits 3 beeps