Compact Oven Displays Error Code - Causes and Solutions

Issue

When the software error occurs, the oven display shows an error code (i.e. F240, F604, F908, etc.).

In this section, you will find a list of the problems that you can handle on your own.

Code and description	Remedy
F240, F439 - the touch fields on the display do not work properly.	Clean the surface of the display. Make sure there is no dirt on the touch fields.
F601 - there is a problem with the Wi-Fi signal.	Check your network connection. Refer to the user manual, "Before first use" chapter, Wireless connection.
F604 - the first connection to Wi-Fi failed.	Check your network connection. Refer to the user manual, "Before first use" chapter, Wireless connection.
F908- the oven system cannot connect with the control panel.	Disconnect the oven from the mains for 1 minute. If the error persists book a service visit
F131 - the temperature of the magnetron sensor is too high.	Turn the oven off and wait until it cools down. Turn the oven on again.
F602, F603 - Wi-Fi is not available	Turn the oven off and on. Ensure the Wi-Fi network is available

If the issue continues, a professional technician can help diagnose and fix the problem.

No matter if your appliance is in warranty, out of warranty, or covered by an appliance protection plan - we’ll guide you to the right service.

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

Book a service

Having issues with your appliance? Book a reliable and professional service from our expert technicians to get your product up and running.

Find your product manual

Solve problems and look up instructions or other documentation for your product.