White coating on washing machine's drum
Resolution
Issue:
- White coating appears on washing machine's drum
Applies to:
- washing machine
Resolution:
1. White coating on the drum in your washing machine may be limescale or soap powder residue.
- This is normal and is not a malfunction of the machine.
- The coating can be removed by using a descaling agent for washing machines.
- In order to completely clean your machine, it may be needed to carry out descaling several times.
- We recommend descaling regularly with an Electrolux descaler, which is available in our Webshop.
Tip: It is always a good idea to descale your washing machine in order to improve performance and to protect the washing machine.
2. When the machine is descaled and clean, you can prevent returns of any coating on the drum by doing the following:
- Be careful with the amount of detergent – follow the manufacturer’s instructions carefully.
- Use detergent from another manufacturer.
- Use liquid detergent.
- Descale the machine regularly.
Was this article helpful?
Related Articles
- Washing machine displays error message E90, E91, E92, E93 or E94
- Washing machine’s fluff filter is jammed, cannot be removed
- White clothes turn grey after washing in my washing machine / washer dryer
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine displays padlock - Electrolux
- Washing machine stops in the middle of a cycle
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message E30, C3 or emits 3 beeps