Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Washing machine does not work / does not react
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Connected appliances - The application cannot connect to the appliance
- How to clean the washing machine detergent drawer
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Clothes are too creased after washing in washing machine
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine displays padlock - Electrolux
- Dark or brown stains on laundry after washing in washing machine
- How to clean and maintain your Electrolux washing machine and extend its life