Washing machine displays error message Eb0, Ebo or emits 11 beeps / 11 flashes
Resolution
Issue:
- Washing machine displays error message Eb0, Ebo or emits 11 beeps / 11 flashes. It may indicate problems with the too low voltage of the power supply.
Applies to:
- Front loader washing machine (integrated and freestanding)
- Top loader washing machine
Resolution:
1. Check the voltage by plugging in the appliance somewhere else and then trying it again.
2. Remove any extension cable and try again.
3. Check whether the product is connected to ground in the electrical installation.
Plug the machine into a grounded socket and try again.
4. Reset the appliance.
Remove the plug from the socket, wait 30 seconds and then plug it in again.
5. Contact an Authorized Service Center.
If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
- Report error code: DR
Was this article helpful?
Related Articles
- Keep your outdoor garments waterproof
- The door of the washing machine cannot be opened
- Dark or brown stains on laundry after washing in washing machine
- Washing machine displays padlock - Electrolux
- Washing machine displays 1- minute pause
- How to clean and maintain your Electrolux washing machine and extend its life
- Connected appliances - The application cannot connect to the appliance
- Grey marks on laundry after washing in washing machine
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash