Opening washing machine's door at the beginning of wash cycle
Resolution
The door normally can be opened before the heating phase or when the height of water in the drum is low (during the first 10 minutes). Try to add more laundry.
Warning: If the door can be opened during a wash or spin cycle, when the washing machine is filled up with water, switch off the power supply to the appliance immediately. Do not use the washing machine until the problem is solved. Contact an Authorized Service Center.
Was this article helpful?
Related Articles
- Washing machine displays error message E90, E91, E92, E93 or E94
- Washing machine’s fluff filter is jammed, cannot be removed
- White clothes turn grey after washing in my washing machine / washer dryer
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine displays padlock - Electrolux
- Washing machine stops in the middle of a cycle
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message E30, C3 or emits 3 beeps