How to replace the control box (3)

Issue

How to replace the control box

Applies to:

  • Cooker Hoods

Resolution

How to remove the control box

Extract the sliding panel and remove the metal grease filters.
With a screwdriver, work on the side metal wings until the metal cover on the internal frame is unblocked from the sliding panel (Fig. 2)


Remove the 3 screws that are holding up the canopy’s cover and extract it (Fig. 3)

Remove the 2 screws over the sliding panel in a way so that you extract the command unit on the part underneath the carriage itself (Fig.4)

Open the command unit by unscrewing the two side screws, extract the card and replace it with one that has the same characteristics according to the electrical connections (Fig. 5 and 6)

Reset everything and check to see that it is functioning correctly

Was this article helpful?

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

To the webshop

Find your product manual

Solve problems and look up instructions or other documentation for your product.

Find manual