Hob displays error message E5
Resolution
Issue:
- Hob displays error message E5
Applies to:
- integrated induction hob
- freestanding cooker with induction hob
Resolution:
1. Disconnect the appliance from power for at least 30 seconds.
Reconnect it and switch it back on.
2. Contact an Authorized Service Center.
If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause:
- Error message E5 indicates a phase or voltage issue.
Was this article helpful?
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The SenseBoil function does not work in my induction hob
- The drawer under induction hob gets very hot
- Hot plate switches itself off / beeps
- The ignition on my gas hob keeps sparking
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E9
- Hob blows/ trips fuse
- Hob displays error message E6 / E641
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The SenseBoil function does not work in my induction hob
- The drawer under induction hob gets very hot
- Hot plate switches itself off / beeps
- The ignition on my gas hob keeps sparking
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E9
- Hob blows/ trips fuse
- Hob displays error message E6 / E641