Can I use the robotic vacuum in a different area (temporarily) without the charging station?
Resolution
Question:
- Can I use the robotic vacuum in a different area (temporarily) without the charging station?
Applies to:
- Pure i9 series robotic vacuum cleaner
- RX9 series robotic vacuum cleaner
Answer:
1. The robotic vacuum can be used in a different area without charger.
It will operate until the battery gets empty.
- Start the robotic vacuum in the same position as the charger should be placed, place the robot on the floor against the wall.
- Make sure there is an empty area of 0.5 m on the sides and 1.5 m in front of the robotic vacuum.
- If the robotic vacuum was started outside the charger, it will return to the start position and just stop, without docking.
- If you want to use the robotic vacuum regularly in different areas, you can buy an extra charging base for each area.
Was this article helpful?
Related Articles
- Will I need to use another vacuum cleaner apart from the robotic vacuum?
- What happens if a (new) obstacle gets in the area already mapped by the robotic vacuum?
- Starting the robotic vacuum (App Links)
- Robotic vacuum main brush is not working well
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- Robotic vacuum makes noise while cleaning /running
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
- If the robotic vacuum gets stuck (under the bed, between the chairs)
- How to proceed when the robotic vacuum is displaying an error message